A construction punch list is the room-by-room list of everything that still needs fixing or finishing before a project is handed over: scuffs, gaps, missing hardware, paint on glass. Below is a free punch list template you can download and use, with one extra column most templates leave out: whether the fix will need a touch-up clean afterwards.
Download the punch list template (CSV). It opens in Excel, Google Sheets and Numbers.
What a punch list is
Near the end of a build, the general contractor walks the space, often with the owner or architect, and writes down everything that doesn't meet the contract or the finish standard. Each item gets a location, a description and the trade responsible. Trades fix their items, the GC checks them, and the list is closed out before final payment and handover.
A good punch list is:
- Specific. "Scuff on upper cabinet door left of hood", not "kitchen touch-ups".
- Located. Room, wall and height, so the trade finds it without a phone call.
- Assigned. One trade per item.
- Tracked. Open, fixed, verified, with dates.
Small physical markers help on site. Many GCs put a small piece of blue painter's tape on each item so trades can find them quickly.

Download the template
The template has one row per item and these columns:
| Column | What goes in it |
|---|---|
| Item # | A running number, so items can be referred to on calls and in texts |
| Room / area | Kitchen, primary bath, unit 3B, level 2 east |
| Location detail | Wall, fixture or height: "upper cabinet left of hood" |
| Description of the issue | What is wrong, in plain words |
| Trade responsible | Painter, tile, drywall, electrician, cleaning |
| Priority | High for anything that blocks occupancy or the walkthrough |
| Date added / Due date | When it was found and when it must be fixed |
| Status | Open, Fixed, Verified |
| Needs touch-up clean after fix? | Yes if the fix will leave dust, sanding residue or fingerprints |
| Photo reference | Photo number or file name |
| Verified by / Date verified | Who checked the fix and when |
| Notes | Anything else |
The file comes with eight example rows from a typical remodel, so you can see how to word items. Delete them before you start.
Download the punch list template (CSV)
How to fill it in
- Walk room by room in a set order, the same way every time, so nothing is skipped. Start at the entry and work clockwise.
- Look in good light, at eye level and floor level. Daylight or strong work lights show what a dim room hides.
- Write one problem per row. Two problems on one line means one of them gets forgotten.
- Take a photo of every item and note the photo number in the sheet.
- Assign each item to one trade before you send the list out.
- Set due dates that leave time for a touch-up clean before the walkthrough.
- Verify each fix in person before you mark it closed.

Where cleaning items belong
Cleaning shows up on punch lists in two ways.
Cleaning items on their own. Protective film left on appliances, labels on windows, paint overspray on glass, grout haze on tile, fingerprints on stainless. These are real punch-list items. Put them on the list, assign them to your cleaning sub, and give them a due date like any other trade. Our guide on how to clean grout haze covers one of the most common.
Cleaning caused by other fixes. Almost every repair leaves something behind:
- Drywall patches leave sanding dust on floors, sills and anything below.
- Paint touch-ups leave tape residue and drips.
- Re-caulking leaves smears and fingerprints on tile and glass.
- Adjusting doors and cabinets leaves fingerprints on new hardware and finishes.
That is what the "Needs touch-up clean after fix?" column is for. When you finish the list, filter on "Yes" and you have the scope for the touch-up clean.
Scheduling the touch-up clean after fixes
The most common scheduling mistake at closeout is cleaning before the punch list is finished. The final clean happens, then three trades come back for fixes, and the rooms are dusty again at the walkthrough.
Book it in this order:
- Final clean after all trades are done with their main work, one to two days before the walkthrough.
- Punch-list fixes after the walkthrough, or in the days before it if you walk early.
- Touch-up clean after the last fix and before move-in or occupancy.
A touch-up clean is short. It covers only the rooms where fixes happened, plus floors and entries walked since the final clean. Contractor touch-up rates start from $0.08 per square foot on commercial work and from $0.10 on residential; see pricing.

For what each cleaning visit covers, see rough clean vs final clean and the post-construction cleaning checklist.
Closing out the list
A punch list is closed when every item is verified, not just fixed:
- Walk it again with the list, after the touch-up clean.
- Mark each item Verified with the date and initials.
- Attach the photos of each fixed item to your closeout file.
- Send the closed list to the owner with the cleaning photo set, so the handover record is complete.
Send us your punch list
We work with general contractors across San Francisco, the Peninsula, the South Bay, the East Bay and Marin. Send your punch list, or plans and photos, with the address and walkthrough date, and we'll bid the final clean and the touch-up clean together. Request a bid, or see how we work with contractors.






